App.Elettroniche

SkyRC eN18 Charger NiMh 4-8 cells 1,2A

€ 20,00

Product information "SkyRC SkyRC eN18 Charger NiMh 4-8 cells 1,2A" Ease of use is the most important thing ´when working with the eN18 NiMH charger. Simply plug the 4-8S Peak Charger into the nearest free socket, connect the battery to the Tamiya-plug and off You go. The colored LED shows You the current process and stays green as soon as the charging process is completed with up to 1.2A and 14.4V. Thanks to the built-in delta-peak detection, the Skyrc eN18 ensures that your batteries actually reach their full capacity when charging. In this way You get even more power and even more runtime from your batteries. This is achieved by using a peak value detection circuit that monitors the voltage of the battery during charging and the charger automatically switches off when the voltage of the battery reaches certain peak values ??and drops. This is in contrast to a timed charger, which often leaves you with a not fully charged battery. Features Simply plug in and charge optimally Built-in circuit for delta peak detection Suitable for 4-8 NiMH cells Connect directly to the socket with a voltage range of 100V to 240V Various protective mechanisms (reverse polarity protection, short circuit protection, low operating temperature) Loading status display: Red (steady): standby Red (flashing): error Green (flashing): charging Green (steady): charging completed                           Technical data Input Voltage: 100-240V Charge Voltage: 4,8-14,4V Charge Current: 1,2A Charge Power: max. 18W No. of Cells: 4-8 Zellen NiMH-Akkus Display: 1 LED Weight: 120g Dimensions: 85x50x54mm Set contains 1x SkyRC eN18 AC NiMH Peak Charger  

Powersupply 15 Volt 4 Ampere

€ 24,40

Product information "SkyRC Powersupply 15 Volt 4 Ampere" The power supply converts the AC power from 100-240V into DC power. Like this you can run a charger that just has a DC socket also with the power from your wall socket. With the built-in LED the power supply show the operating status. Suitable for many chargers, simply check the input data from your chargerTechnical Data Input: AC 100-240V (50/60Hz 1,5A) Output: DC 15V mit 4A Circuit power: 60W Plug: DC plug, inner diameter: 2.6mm, outer diameter: 5.5mm Dimensions: 56x114x32mm Weight: 260g Cable Length: approx. 100cm  

C4 Lipo 2-4S 50W Charger AC

€ 34,90

Product information "ToolkitRC C4 Lipo 2-4S 50W Charger AC" The C4 charger is a small and easy-to-use charger for lithium and nickel batteries with a variety of protective features for safe charging. Features: 50W AC charging power and maximum 4A charging current Compact balance charger Suitable for LiPo, LiHV and LiFe as well as NiMH and NiCd LED display Easy handling Balance plug 'n Technical Specification: Input Voltage: AC 100-240V max. 55W Charging Current: 0.5A, 1.0A, 2.0A, 4.0A @50W Charging Accuracy: <0.01V @ 4.20V Balancing Current: max. 400mA, 4.20V Cells: LiPo//LiHV/LiFe 2-4S Cells: NiMH/NiCd 5-8S Dimensions: 106x64x35mm Weight: 165g Delivery: 1x C4 Charger1x Power cable 1x Manual  

Robitronic Expert LD 60 Charger LiPo 2-4s 6A 60W

€ 37,70

Product information "Robitronic Expert LD 60 Charger LiPo 2-4s 6A 60W" The Expert LD 60 Charger is a multi-function charger/discharger that allows you to use the most popular battery types such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb.With a remarkable 60 watts of charging power and a maximum of 6A charging current, the Expert LD 60 charger offers more than sufficient charging power for most applications in a compact design.On the front there is a built-in XT60 plug where you can easily connect your battery or charging cable reverse polarity protected.Information about settings and running process can be obtained via the backlit LCD display.The Expert LD 60 is the perfect multifunction charger and the right choice for most modeller. Features: Compact design 60 watts charging power, max. 6A charging current Suitable for: LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb Easy handling and navigation with four buttons Informative LCD display with backlight Built-in XT60 connector on the front panel 5 batteries profile memory Integrated balancer with max. 300mA current Various security settings (delta peak sensitivity, auto charge current limit, capacity limit, temperature limit, process time limit, automatic fan) Technical Specifications: Input Voltage AC: 100V -240V Max Charge Power: 60W Max Discharge Power: 10W Charge Current Range: 0.1A - 6.0A Discharge Current Range: 0.1A - 2.0A Balancer current: max. 300mAh Cells: LiPo/LiFe/LiIon/LiHV 2s - 4s Cells: NiMH/NiCd 6s - 8s Pb Battery Voltage:  6V - 12V Weight: 302g Dimension: 115x112x55mm Delivery: 1x Expert LD 60 charger1x Power cord1x Charging cable Tamiya-connector1x Charging cable T-connector1x Manual Optional Accessories: SkyRC Temperature Sensor (SK600040)  

Robitronic Expert LD 20 Charger NiMh 4-8 cells 2A

€ 15,80

Product information "Robitronic Expert LD 20 Charger NiMh 4-8 cells 2A" Delta Peak charger for 4-8cell NiMH and NiCd batteries with a capacity from 2000mAh up to 6000mAh. The charging time for a 3000mAh batterie is around 90 minutes. Technical Specifications Input Voltage: AC 100-240V, 50/60Hz Output Voltage: DC 4.8-16V Supports Battery Type: 4-8 cell NiMH, NiCd2000-6000mAh Current Output / Power: = 2A / 20W LED StatusStandbyChargingFinished Green (flashing)RedGreen Output Port: T-Plug Related links to "Robitronic Expert LD 20 Charger NiMh 4-8 cells 2A"  

Adapter w Speed Control (220 V

€ 68,50

Caratteristiche tecniche dell’alimentatore (5,4 VA – 230 V):Entrata: 230 V AC, 50-60 HzUscita: 12 V AC, 450 mA Caratteristiche tecniche del regolatore:Entrata: 12 V AC, 2 AUscita: 0-12 V DC, 450 mA CARATTERISTICHE Codice EAN: 4015615550037 Età Consigliata: Sup. ai 14 anni  

Alimentatore 12V 5A

€ 64,90

CARICABATTERIE V3 LiPo 2-3S 800mA 12W-220V

€ 18,70

Cavo carica Tamiya 30cm 14AWG maschio

€ 3,30

Cavo per la carica delle batterie.connettore Tamiya, bananaLunghezza 30cm14AWG (2,08mm²)  

CARICABATTERIE MH-8S NiMh 1-8cell 800mA 12W-220V

€ 17,00

CARICABATTERIE MH-8S NiMh 1-8cell 800mA 12W-220V  

CARICABATTERIE MAXPRO EASY 100

€ 53,00

CARICABATTERIE MAXPRO EASY 100 Caricabatterie con doppia tensione di ingresso epotenza di 100W/10A Corrente alternata 100~240V o corrente continua 11~18VAdatto per batterie Li.Po - LiHv - Li.Ion - LiFe (da 1 a 6 celle) - NiCd - NiMh (da 1 a 15 celle)Tensione batteria piombo 2~24VPorta sensore temperaturaCorrente di carica 0.1~10.0ACorrente di scarica 0.1~2.0APotenza di carica Max 100WPotenza di scarica Max 10WCorrente di bilanciamento 300mA  

Trixx U-Bec 5-6V/4Amp

€ 15,00

Trixx U-Bec 5-6V/4Amp Il Trixx U-Bec è uno stabilizzatore di tensione switching con 4Amp di potenza. La tensione di uscita è selezionabile tra 5 e 6V mentre in ingresso accetta batterie fino a 6S LiPo! Estremamente compatto Tensione di uscita selezionabile tramite jumper (5-6V) Circuito switching da 4Amp Capace di abbassare la tensione di un pacco batterie da 2-6 LiPo  

Trixx U-Bec 5-5,5-6V/6Amp

€ 26,90

Trixx U-Bec 5-5,5-6V/6Amp Il Trixx U-Bec è uno stabilizzatore di tensione switching con 6Amp di potenza. La tensione di uscita è selezionabile tra 5 - 5,5 - 6V mentre in ingresso accetta batterie fino a 6S LiPo! Estremamente compatto Tensione di uscita selezionabile tramite jumper (5-5,5-6V) Circuito switching da 6Amp Capace di abbassare la tensione di un pacco batterie da 2-6 LiPo  

IMAX B6AC AC/DC CHARGER 80W

€ 45,00

iMax B6AC AC/DC Charger 80W Connettività con PC Specifiche tecniche Alimentazione V 12 DC/220 AC Range alimentazione V 11-18/100-240 Potenza Max carica W 80 Potenza Max scarica W 8 Corrente di carica A 0,1- 5,0 Corrente di scarica A 0,1- 1,0 Numero celle Nixx 1-15 Numero celle LiPo 1-6 Numero celle Pb 1-10 Corrente bilanciamento mAh 300 Potenza del circuito adattatore da AC a DC (DC 11-18V/5A) Dimensioni mm 136x141x34

Y servo reverser

€ 16,90

X100 touch screen

€ 99,00

smart guard 2 tester batterie Li-Po

€ 28,50

Smart Guard 2 Tester Batterie e bilanciatoreUn accessorio molto utile per tutti coloro che usano batterie Li-Po, Li-Fe, Li-Ion, Ni-Cd e Ni-MHBilancia automaticamente I pacchi batteriaVisualizza il voltaggio complessivo della batteriaVisualizza la percentuale residua di carica della batteria (Solo per le batterie al Litio)VIsualizza I voltaggi delle singole celle (Solo per le batterie al Litio)Indica la cella con il voltaggio massimo e quella col voltaggio minimo (Solo per le batterie al Litio)VIsualizza Ia differenza di voltaggio tra la cella più alta e quella più bassa (Solo per le batterie al Litio)CARATTERISTICHEPer tutti i pacchi al Litio da 2 a 7 cellePer pacchie al Ni-Cd o Ni-MH da 4 a 7 celle

Smart Alarm tester batterie

€ 18,50

SMART ALARMTester Batterie al Li-Po, NiCd, NiMH e Pb.Questo piccolo e leggero Strumento di Misura è in grado di effettuare parecchie misure su ogni Pacco Batteria, formato da celle Li-Po, Ni-Cd, NiMH o Pb.Oltre alla carica residua è in grado di indicare il Voltaggio delle singole Celle, di impostare l'Allarme per il Voltaggio Minimo e infine di sapere quele è la Cella con il Voltaggio Maggiore, quella con il Voltaggio Maggiore e la Differenza tra la Cella a Voltaggio Maggiore e quella a Voltaggio Minore. Può essere utilizzato a mano oppure, dato il piccolo peso e le piccole dimensioni, può venire installato anche sull'aereo.

servo reverser

€ 16,90

Rockamp polyquest auf JST-XH adapter set

€ 4,90

Rockamp backup guard ladekabel JST stecker

€ 7,50

multi balance board 2-6 cell (XH,EH,HP/PQ,TP/FP)

€ 13,90

Monza caricabatterie 2 celle 2,5A

€ 19,90

MC-Balancer

€ 20,50

Fusion NX85 Vector AC/DC EURO

€ 37,90

Fusion LX61B Pro Eclipse AC/DC

€ 168,00

Caricabatterie MAXPRO EASY 80

€ 59,00

Caricabatterie Easy pro 80 220V 12 v , LILON 1-6 CELL , LIPO 1-6 CELL , LIFE 1-6 CELL , NICD 1-15 CELL , NIMH 1-15 CELL , PB 2-22V

Caricabatterie LD14Lz 1-3S LiPo/LiFe 1-4A AC/DC -12V

€ 39,90

CARICA EXPERT PRO 230/12 ++*

€ 94,50

Car failsafe light

€ 14,50

Both failsafe units move the throttle servo to a setting predetermined by the end user and operate on total loss of signal, strong interference to the radio signal and also if the receiver battery goes flat. It is highly recommended that all IC aircraft and IC cars are fitted with a throttle failsafe.Both units operate on 4.8V and 6.0V.